Teardrop Swirl Cutters
Price range: £1.00 through £42.50
Teardrop Swirl shaped cutters for metal clay, polymer clay and air dry clay.
Full set contains 24 cutters, 12 sets of mirrored pairs.
Sizes available: 40mm, 35mm, 30mm, 28mm, 25mm, 22mm, 20mm, 18mm, 15mm, 12mm, 10mm & 8mm
Height of cutter: 8mm
Dimensions:
40mm: 40mm high. 22mm at widest point.
35mm: 35mm high. 19mm at widest point.
30mm: 30mm high. 16mm at widest point.
28mm: 28mm high. 15mm at widest point.
25mm: 25mm high. 13mm at widest point.
22mm: 22mm high. 12mm at widest point.
20mm: 20mm high. 11mm at widest point.
18mm: 158mm high. 9mm at widest point.
15mm: 15mm high. 8mm at widest point.
12mm: 12mm high. 6mm at widest point.
10mm: 10mm high. 5mm at widest point.
8mm: 8mm high. 4mm at widest point.
Direction:
When selecting either left or right facing cutters, please remember the cutting edge will show the shape in the opposite direction.
Swirl point facing left: when cut the point is facing towards the left
Swirl point facing right: when cut the point is facing towards the right
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!
