Sail Cutters
Price range: £1.20 through £43.00
Sail shaped cutters for metal clay, polymer clay and air dry clay.
Full set contains 24 cutters, 12 sets of mirrored pairs. A full set of left or right facing cutters is not available.
Sizes available: 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm
Height of cutter: 8mm
Dimensions:
40mm: 40mm high. 30mm wide
35mm: 35mm high. 27mm wide
30mm: 30mm high. 23mm wide
28mm: 28mm high. 21mm wide
25mm: 25mm high. 19mm wide
22mm: 22mm high. 17mm wide
20mm: 20mm high. 15mm wide
18mm: 18mm high. 13mm wide
15mm: 15mm high. 11mm wide
12mm: 12mm high. 9mm wide
10mm: 10mm high. 7mm wide
8mm: 8mm high. 5mm wide
Direction:
When selecting either left or right facing cutters, please remember the cutting edge will show the shape in the opposite direction.
Top point facing left: when cut the point is facing towards the left
Top point facing right: when cut the point is facing towards the right
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!
