Running Hare Cutters
£2.00 – £19.50
Running hare shaped cutters for metal clay.
Click here for Moon Gazing Hares.
Sizes available: 50mm, 38mm, 30mm & 20mm
Height of cutter: 8mm
Dimensions:
50mm: 50mm from tip of front toe to end of back toe. 23mm from tip of ear to underbelly.
38mm: 38mm from tip of front toe to end of back toe. 16mm from tip of ear to underbelly.
30mm: 30mm from tip of front toe to end of back toe. 13mm from tip of ear to underbelly.
38mm: 20mm from tip of front toe to end of back toe. 9mm from tip of ear to underbelly.
Direction:
When selecting either left or right facing cutters, please remember the cutting edge will show the hare running in the opposite direction.
Hare facing left: when cut the hare is running towards the left
Hare facing right: when cut the hare is running towards the right
Inset detail depth: with clay rolled to 1mm thick (4 playing cards) the inset lines will be 0.2mm deep, leaving 0.8mm of clay for support. If you roll clay 0.75mm (3 playing cards) or less no inset detail will show.
The cutting edge is super fine: 0.2mm-0.4mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *7-10 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*processing days are accurate for Oct/Nov 2024. If you need your order faster, please message me to see if I can fit you in.
