Pebble Shaped Cutters
£2.00 – £22.00
Pebble shaped cutters for metal clay, polymer clay or air dry clay.
Sizes available: 20mm, 25mm, 30mm, 34mm, 38mm, 42mm, 47mm
Height of cutter: 8mm
Dimensions:
20mm: 20mm high, 15mm at widest point.
25mm: 25mm high, 19mm at widest point.
30mm: 30mm high, 22mm at widest point.
34mm: 34mm high, 25mm at widest point.
38mm: 38mm high, 28mm at widest point.
42mm: 42mm high, 31mm at widest point.
47mm: 47mm high, 35mm at widest point.
Direction:
The pebbles are slight asymmetric so I’m offering them in singles and in mirror pairs.
If purchasing a single, if you want the lowest corner on the left purchase the one called left. If you want the lowest corner on the right side then purchase the one called right.
See images for details. PLEASE NOTE that cutters are photographed with the cutting edge up.
The cutting edge is super fine: 0.2mm-0.4mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*processing days are accurate for Dec 2024. If you need your order faster, please message me to see if I can fit you in.
