Feather Cutters
£2.75 – £6.50
Feather shaped cutters for metal clay.
Sizes available: 36mm, 62mm
Height of cutter: 10mm
Dimensions:
Large: 62mm long x 14mm at widest part
Small: 36mm long x 9mm at widest part
Direction:
Left: point of feather faces left when stalk is facing down
Right: point of feather faces right when stalk is facing down (photo with clay shapes are Large Right and Small Right)
Vein depth: with clay rolled to 1mm thick (4 playing cards) the vein line will be 0.4mm deep, leaving 0.6mm of clay for support.
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!