Curved Heart Cutters by Stephanie Chavez
Price range: £1.00 through £46.50
Curved Heart shaped cutters for metal clay, polymer clay and air dry clay.
This shape has been designed by Stephanie Chavez.
Full set contains 32 cutters, 16 sets of mirrored pairs. A full set of left or right facing cutters is not available.
Sizes available: 4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 32mm, 35mm, 38mm, 40mm
Height of cutter: 8mm
Direction:
When selecting either left or right facing cutters, please remember the cutting edge will show the shape in the opposite direction.
Swirl point facing left: when cut the point is facing towards the left
Swirl point facing right: when cut the point is facing towards the right
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!
