Craftcast Wizz Stearne Woodland Wonders Cutter Kits
Price range: £4.00 through £10.50
PLEASE NOTE: If buying multiple kits, you only need ONE SET OF LEAVES, unless you want multiple of the same cutters 😁. The finished hare and owl brooches show moulded leaves. The leaf cutters are from the Veined Leaf Cutters set.
Leaf nail art moulds stock coming soon!
This set has been developed for Wizz Stearne’s Woodland Wonders Brooches in Metal Clay class that is available on Craftcast.com
Each kit has an animal shape and circle/oval frame (and optional 3 sizes of leaf cutters in mirrored pairs).
You will choose whether your animal faces left or right and whether you want the leaves included.
Kits
Moon Gazing Hare:
- SMALL 24mm Hare and 30mm Circle Link (frame) cutter
- LARGE 28mm Hare and 35mm Circle Link (frame) cutter
Running Hare:
- SMALL 30mm Hare and 35mm Oval Link (frame) cutter
- LARGE 38mm Hare and 40mm Oval Link (frame) cutter
Sitting Fox:
- SMALL 24mm Fox and 30mm Circle Link (frame) cutter
- LARGE 28mm Fox and 35mm Circle Link (frame) cutter
Squirrel:
- SMALL 20mm Squirrel and 25mm Circle Link (frame) cutter
- LARGE 25mm Squirrel and 30mm Circle Link (frame) cutter
Owl:
- SMALL 26mm Owl and 30mm Circle Link (frame) cutter
- LARGE 32mm Owl and 35mm Circle Link (frame) cutter
Optional: 8mm, 6mm & 4mm leaves (mirrored pairs 6 cutters).
You can also purchase the cutters separately.
Moon Gazing Hare Cutters
Running Hare Cutters
Sitting Fox Cutters
Squirrel Cutters
Owl Cutters
Height of cutters: 8mm
Direction:
When selecting either left or right facing cutters, please remember the cutting edge will show the animal sitting in the opposite direction.
Animal facing left: when cut the animal is facing towards the left
Animal facing right: when cut the animal is facing towards the right
Each set has a 15% discount on buying all the cutters separately.
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!
