Craftcast Chain Making Set
£28.50
Link and toggle cutters in a range of shapes for metal clay, polymer clay and air dry clay. This set has been developed to complement my Introduction to Metal Clay Chain class that is available on Craftcast.com
Shapes in this set:
Circle 15mm & 18mm
Pill Oval 20mm & 25mm
Hexagon 15mm & 18mm
Square 15mm & 20mm
Triangle 15mm & 20mm
Flower 15mm & 18mm
Arch 23mm
Feather 32mm (small)
Bubble Toggle bar 25mm x 6mm wide (works with most cutters 18mm and smaller)
This set has 15 cutters in total, 13 link cutters (one of each size in each shape) and 2 toggle cutters.
Height of cutters: 8-10mm
This set has a 15% discount on buying all the cutter separately.
The cutting edge is super fine: 0.2mm-0.3mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *5-7 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- Sizes are approximate and may be slightly larger or smaller than stated.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*If you need your order faster, please message me to see if I can fit you in.
See Cutter Care for full details on keeping your cutters in good condition!