Christmas Cutters
£0.75 – £17.00
Christmas shaped cutters for metal clay, polymer clay and air dry clay.
IMAGES COMING SOON! for snowman and all standard sizes. PLEASE NOTE, if you have ordered a Christmas Advent Calendar you will have most of the Standard sized cutters in there.
Designs available:
Present: Standard & Tiny
Snowflake: Standard & Tiny
Tree: Standard & Tiny
Stocking: Standard & Tiny
Candy Cane: Standard & Tiny
Bauble: Standard & Tiny
Holly (individual leaves in pairs): Tiny only (two sizes)
Holly double with berries: Standard only
Snowman: Standard & Tiny
Height of cutter: 8 or 10mm
Dimensions:
Present: Standard 25mm high by 20mm wide, Tiny 15mm high by 12mm wide
Snowflake: Standard 23mm all angles! Tiny 14mm all angles
Tree: Standard 25mm high by 20mm wide, Tiny 12mm high 8mm wide
Stocking: Standard 25mm by 20mm wide, Tiny 15mm high by 11mm wide
Candy Cane: Standard 28mm by 18mm wide, Tiny 17mm high by 7mm wide
Bauble: Standard 25mm & 12mm
Holly (individual leaves in pairs): 10mm long by 5mm wide & 8mm long by 3mm wide
Holly double with berries: 35mm long, 22mm wide
Snowman: Standard 21mm high by 14mm wide & Tiny 16mm high by 9mm wide
Inset detail depth: with clay rolled to 1mm thick (4 playing cards) the inset lines will be 0.2mm deep, leaving 0.8mm of clay for support. If you roll clay 0.75mm (3 playing cards) or less no inset detail will show.
The cutting edge is super fine: 0.2mm-0.4mm, width varies depending on the complexity of the design.
Most cutters have the size embossed on the side. Special or complex shapes do not.
The size is the diameter of the shape when cut, sizes are approximate.
These cutters are designed for metal clay, they will also work for polymer clay and air dry clay.
Please note:
- All cutters are printed to order, please allow *7-10 processing days (not including shipping / in transit days) when ordering.
- Cutters are made of durable but not indestructable PLA plastic. To clean them use warm water only.
- Colour of the cutters may vary. The colour in the photos is not gauranteed.
- They cannot withstand heat: do not put in a dehydrator, on a hot plate, in hot water or leave in strong direct sunlight.
- Clay can stick to the cutters. Always use a good release agent or clingfilm. My tips for using the cutters are coming soon!
- The very fine cutting edge can be damaged if cutters are stored haphazardly together.
- A full set (if offered) will have one cutter of each size.
*processing days are accurate for Oct/Nov 2024. If you need your order faster, please message me to see if I can fit you in.
